diff --git a/examples/microchip/atmega/build.zig b/examples/microchip/atmega/build.zig
index 9cfe71355..e471cad3f 100644
--- a/examples/microchip/atmega/build.zig
+++ b/examples/microchip/atmega/build.zig
@@ -21,7 +21,8 @@ pub fn build(b: *std.Build) void {
         .{ .target = mb.ports.atmega.boards.arduino.pro_mini_3v3, .name = "arduino-pro_mini_3v3_spi_flash", .file = "src/spi_flash_w25q.zig" },
         .{ .target = mb.ports.atmega.boards.arduino.pro_mini_5v, .name = "arduino-pro_mini_5v_spi_flash", .file = "src/spi_flash_w25q.zig" },
         .{ .target = mb.ports.atmega.boards.arduino.nano, .name = "arduino-nano_uart_echo", .file = "src/uart_echo.zig" },
-        .{ .target = mb.ports.atmega.boards.arduino.nano, .name = "arduino-pro_mini_5v_uart_echo", .file = "src/uart_echo.zig" },
+        .{ .target = mb.ports.atmega.boards.arduino.pro_mini_3v3, .name = "arduino-pro_mini_3v3_uart_echo", .file = "src/uart_echo.zig" },
+        .{ .target = mb.ports.atmega.boards.arduino.pro_mini_5v, .name = "arduino-pro_mini_5v_uart_echo", .file = "src/uart_echo.zig" },
         .{ .target = mb.ports.atmega.boards.arduino.uno_rev3, .name = "arduino-uno_uart_echo", .file = "src/uart_echo.zig" },
         .{ .target = mb.ports.atmega.boards.emakefun.rf_nano_v3, .name = "rf-nano-v3_uart_echo", .file = "src/uart_echo.zig" },
         .{ .target = mb.ports.atmega.boards.emakefun.rf_nano_v3, .name = "rf-nano-v3_spi_nrf24", .file = "src/spi_nrf24.zig" },
diff --git a/examples/microchip/atmega/src/uart_echo.zig b/examples/microchip/atmega/src/uart_echo.zig
index 9d99cf964..5db1e7669 100644
--- a/examples/microchip/atmega/src/uart_echo.zig
+++ b/examples/microchip/atmega/src/uart_echo.zig
@@ -1,6 +1,6 @@
-//! Prints a greeting over USART0 (115200 8N1) and echoes back every byte it
+//! Prints a greeting over USART0 (57600 8N1) and echoes back every byte it
 //! receives. On Nano-style boards it shows up on the USB serial port, e.g.:
-//!   picocom -b 115200 /dev/ttyUSB0
+//!   picocom -b 57600 /dev/ttyUSB0
 
 const microzig = @import("microzig");
 const uart = microzig.hal.uart;
@@ -14,7 +14,7 @@ comptime {
 }
 
 pub fn main() void {
-    microzig.board.uart_setup.apply(.{ .baud_rate = 115_200 });
+    microzig.board.uart_setup.apply(.{ .baud_rate = 57_600 });
 
     uart.write_blocking("Hello from MicroZig! Type something:\r\n");