diff --git a/docs/content.zh/docs/connectors/datastream/formats/text_files.md b/docs/content.zh/docs/connectors/datastream/formats/text_files.md index 2c1a4fd8ff7f91..a9d4909617ef6b 100644 --- a/docs/content.zh/docs/connectors/datastream/formats/text_files.md +++ b/docs/content.zh/docs/connectors/datastream/formats/text_files.md @@ -73,7 +73,7 @@ stream = env.from_source(source, WatermarkStrategy.no_watermarks(), "file-source 在此示例中,我们创建了一个 DataStream,随着新文件被添加到目录中,其中包含的文本文件行的字符串流将无限增长。我们每秒会进行新文件监控。 此处不需要水印策略,因为记录不包含事件时间戳。 -{{< tabs "continous" >}} +{{< tabs "continuous" >}} {{< tab "Java" >}} ```java final FileSource source = diff --git a/docs/content.zh/docs/connectors/table/formats/protobuf.md b/docs/content.zh/docs/connectors/table/formats/protobuf.md index 1e09de5772bfd8..12b69dddc487eb 100644 --- a/docs/content.zh/docs/connectors/table/formats/protobuf.md +++ b/docs/content.zh/docs/connectors/table/formats/protobuf.md @@ -132,7 +132,7 @@ Format Options no (none) String - The full name of a Protobuf generated class. The name must match the message name in the proto definition file. $ is supported for inner class names, like 'com.exmample.OuterClass$MessageClass' + The full name of a Protobuf generated class. The name must match the message name in the proto definition file. $ is supported for inner class names, like 'com.example.OuterClass$MessageClass'
protobuf.ignore-parse-errors
diff --git a/docs/content.zh/docs/deployment/adaptive_batch.md b/docs/content.zh/docs/deployment/adaptive_batch.md index e766ec39e2b3c8..81a4e96c911f22 100644 --- a/docs/content.zh/docs/deployment/adaptive_batch.md +++ b/docs/content.zh/docs/deployment/adaptive_batch.md @@ -58,7 +58,7 @@ Adaptive Batch Scheduler 支持自动推导算子并行度,如果算子未设 - [`execution.batch.adaptive.auto-parallelism.min-parallelism`]({{< ref "docs/deployment/config" >}}#execution-batch-adaptive-auto-parallelism-min-parallelism): 允许自动设置的并行度最小值。 - [`execution.batch.adaptive.auto-parallelism.max-parallelism`]({{< ref "docs/deployment/config" >}}#execution-batch-adaptive-auto-parallelism-max-parallelism): 允许自动设置的并行度最大值,如果该配置项没有配置将使用通过 [`parallelism.default`]({{< ref "docs/deployment/config" >}}) 或者 `StreamExecutionEnvironment#setParallelism()` 设置的默认并行度作为允许自动设置的并行度最大值。 - [`execution.batch.adaptive.auto-parallelism.avg-data-volume-per-task`]({{< ref "docs/deployment/config" >}}#execution-batch-adaptive-auto-parallelism-avg-data-volume-per-ta): 期望每个任务平均处理的数据量大小。请注意,当出现数据倾斜,或者确定的并行度达到最大并行度(由于数据过多)时,一些任务实际处理的数据可能会远远超过这个值。 - - [`execution.batch.adaptive.auto-parallelism.default-source-parallelism`]({{< ref "docs/deployment/config" >}}#execution-batch-adaptive-auto-parallelism-default-source-paralle): source 算子可动态推导的最大并行度,若该配置项没有配置将优先使用 [`execution-batch-adaptive-auto-parallelism-max-parallelism`]({{< ref "docs/deployment/config" >}})作为允许动态推导的并行度最大值,若该配置项也没有配置,将使用 [`parallelism.default`]({{< ref "docs/deployment/config" >}}) 或者 `StreamExecutionEnvironment#setParallelism()` 设置的默认并行度。 + - [`execution.batch.adaptive.auto-parallelism.default-source-parallelism`]({{< ref "docs/deployment/config" >}}#execution-batch-adaptive-auto-parallelism-default-source-parallelism): source 算子可动态推导的最大并行度,若该配置项没有配置将优先使用 [`execution-batch-adaptive-auto-parallelism-max-parallelism`]({{< ref "docs/deployment/config" >}})作为允许动态推导的并行度最大值,若该配置项也没有配置,将使用 [`parallelism.default`]({{< ref "docs/deployment/config" >}}) 或者 `StreamExecutionEnvironment#setParallelism()` 设置的默认并行度。 - 不要指定算子的并行度: Adaptive Batch Scheduler 只会为用户未指定并行度的算子推导并行度。 所以如果你想算子的并行度被自动推导,需要避免通过算子的 `setParallelism()` 方法来为其指定并行度。 @@ -78,7 +78,7 @@ public interface DynamicParallelismInference { 其中 Context 会提供可推导并行度上界、期望每个任务平均处理的数据量大小、动态过滤信息来协助并行度推导。 Adaptive Batch Scheduler 将会在调度 Source 节点之前调用上述接口,需注意实现中应尽量避免高耗时的操作。 -若 Source 未实现上述接口,[`execution.batch.adaptive.auto-parallelism.default-source-parallelism`]({{< ref "docs/deployment/config" >}}#execution-batch-adaptive-auto-parallelism-default-source-paralle) 将会作为 Source 节点的并行度。 +若 Source 未实现上述接口,[`execution.batch.adaptive.auto-parallelism.default-source-parallelism`]({{< ref "docs/deployment/config" >}}#execution-batch-adaptive-auto-parallelism-default-source-parallelism) 将会作为 Source 节点的并行度。 需注意,Source 动态并行度推导也只会为用户未指定并行度的 Source 算子推导并行度。 diff --git a/docs/content.zh/docs/deployment/filesystems/azure.md b/docs/content.zh/docs/deployment/filesystems/azure.md index a88952590f55cc..d51ccd3b608f85 100644 --- a/docs/content.zh/docs/deployment/filesystems/azure.md +++ b/docs/content.zh/docs/deployment/filesystems/azure.md @@ -47,7 +47,7 @@ wasb://@$.blob.core.windows.net/@$.blob.core.windows.net/ -// ABFS unecrypted access +// ABFS unencrypted access abfs://@$.dfs.core.windows.net/ // ABFS SSL encrypted access diff --git a/docs/content.zh/docs/deployment/metric_reporters.md b/docs/content.zh/docs/deployment/metric_reporters.md index 4696a58278aefd..7083ee33a57b52 100644 --- a/docs/content.zh/docs/deployment/metric_reporters.md +++ b/docs/content.zh/docs/deployment/metric_reporters.md @@ -186,7 +186,7 @@ InfluxDB 发送器会使用 http 协议按照将指标发送到 InfluxDB 服务 参数: - `port` - (可选的)Prometheus 发送器监听的端口,默认为 [9249](https://github.com/prometheus/prometheus/wiki/Default-port-allocations)。如果需要在一台机器上运行多个发送器示例进行监控时(比如 TaskManger 与 JobManager 在一台机器上运行时),建议将端口号配置为 `9250-9260` 这样的区间。 -- `filterLabelValueCharacters` -(可选的)指定是否过滤 label 中的非法字符。如果设置过滤,所有没有按照 \[a-zA-Z0-9:_\] 匹配的字符都会被过滤掉,如果设置不过滤,则不会有字符被过滤掉。设置不过滤前,请确保你的 label 符合 [Prometheus 的 lable 命名规范](https://prometheus.io/docs/concepts/data_model/#metric-names-and-labels)。 +- `filterLabelValueCharacters` -(可选的)指定是否过滤 label 中的非法字符。如果设置过滤,所有没有按照 \[a-zA-Z0-9:_\] 匹配的字符都会被过滤掉,如果设置不过滤,则不会有字符被过滤掉。设置不过滤前,请确保你的 label 符合 [Prometheus 的 label 命名规范](https://prometheus.io/docs/concepts/data_model/#metric-names-and-labels)。 配置示例: diff --git a/docs/content.zh/docs/deployment/resource-providers/standalone/kubernetes.md b/docs/content.zh/docs/deployment/resource-providers/standalone/kubernetes.md index 9a4d9dd37c7dec..52e6378025a698 100644 --- a/docs/content.zh/docs/deployment/resource-providers/standalone/kubernetes.md +++ b/docs/content.zh/docs/deployment/resource-providers/standalone/kubernetes.md @@ -45,7 +45,7 @@ under the License. ### 准备 -本指南假设存在一个 Kubernets 的运行环境。你可以通过运行 `kubectl get nodes` 命令来确保 Kubernetes 环境运行正常,该命令展示所有连接到 Kubernets 集群的 node 节点信息。 +本指南假设存在一个 Kubernetes 的运行环境。你可以通过运行 `kubectl get nodes` 命令来确保 Kubernetes 环境运行正常,该命令展示所有连接到 Kubernetes 集群的 node 节点信息。 如果你想在本地运行 Kubernetes,建议使用 [MiniKube](https://minikube.sigs.k8s.io/docs/start/)。 @@ -156,7 +156,7 @@ $ ./bin/flink run -m localhost:8081 ./examples/streaming/TopSpeedWindowing.jar -### 在 Kubernets 上访问 Flink +### 在 Kubernetes 上访问 Flink 接下来可以访问 Flink UI 页面并通过不同的方式提交作业: @@ -207,7 +207,7 @@ flink-taskmanager-64847444ff-nnd6m 1/1 Running 3 3m28s ### 高可用的 Standalone Kubernetes -对于在 Kubernetes 上实现HA,可以参考当前的 [Kubernets 高可用服务]({{< ref "docs/deployment/ha/overview" >}})。 +对于在 Kubernetes 上实现HA,可以参考当前的 [Kubernetes 高可用服务]({{< ref "docs/deployment/ha/overview" >}})。 diff --git a/docs/content.zh/docs/deployment/security/security-ssl.md b/docs/content.zh/docs/deployment/security/security-ssl.md index c988d2b244bda5..6e4a4d537ac79e 100644 --- a/docs/content.zh/docs/deployment/security/security-ssl.md +++ b/docs/content.zh/docs/deployment/security/security-ssl.md @@ -61,7 +61,7 @@ added to the container images, or attached to the YARN deployment. - In an environment where operators are constrained to use firm-wide Internal CA (cannot generated self-signed certificates), the recommendation is to still have a dedicated key pair / certificate for the Flink deployment, signed by that CA. - However, the TrustStore must then also contain the CA's public certificate tho accept the deployment's certificate + However, the TrustStore must then also contain the CA's public certificate to accept the deployment's certificate during the SSL handshake (requirement in JDK TrustStore implementation). **NOTE:** Because of that, it is critical that you specify the fingerprint of the deployment certificate diff --git a/docs/content.zh/docs/getting-started/flink-operations-playground.md b/docs/content.zh/docs/getting-started/flink-operations-playground.md index 86716b77307016..31e56bb29289e5 100644 --- a/docs/content.zh/docs/getting-started/flink-operations-playground.md +++ b/docs/content.zh/docs/getting-started/flink-operations-playground.md @@ -575,7 +575,7 @@ docker compose scale taskmanager=2 **请求** ```bash -curl "localhost:8081/jobs//metrics?get=lastCheckpointSize" +curl "localhost:8081/jobs//metrics?get=lastCheckpointSize" ``` **预期响应 (结果已格式化且去除了占位符)** ```json @@ -592,7 +592,7 @@ REST API 不仅可以用于查询指标,还可以用于获取正在运行中 **请求** ```bash # 可以从结果中获取感兴趣的 vertex-id -curl localhost:8081/jobs/ +curl localhost:8081/jobs/ ``` **预期响应 (结果已格式化)** diff --git a/docs/content.zh/docs/sql/hive-compatibility/hive-dialect/alter.md b/docs/content.zh/docs/sql/hive-compatibility/hive-dialect/alter.md index 5c32af26d506a2..d457dfdcfd4721 100644 --- a/docs/content.zh/docs/sql/hive-compatibility/hive-dialect/alter.md +++ b/docs/content.zh/docs/sql/hive-compatibility/hive-dialect/alter.md @@ -250,7 +250,7 @@ ALTER TABLE table_name [PARTITION partition_spec] CHANGE [COLUMN] col_old_name c ```sql ALTER TABLE t1 CHANGE COLUMN c1 new_c1 STRING FIRST; -ALTER TABLE t1 CHANGE COLUMN c1 new_c1 STRING AFRER c2; +ALTER TABLE t1 CHANGE COLUMN c1 new_c1 STRING AFTER c2; ``` #### Add/Replace Columns diff --git a/docs/content.zh/docs/sql/interfaces/jdbc-driver.md b/docs/content.zh/docs/sql/interfaces/jdbc-driver.md index b2dc74b2cc1072..c99a504f2350fd 100644 --- a/docs/content.zh/docs/sql/interfaces/jdbc-driver.md +++ b/docs/content.zh/docs/sql/interfaces/jdbc-driver.md @@ -231,6 +231,6 @@ public class Sample { ### Use with Others -In addition to java, Flink JDBC driver can be used by any JVM language such as scala, kotlin and ect, you can add the dependency of Flink JDBC driver in your project and use it directly. +In addition to java, Flink JDBC driver can be used by any JVM language such as scala, kotlin, etc., you can add the dependency of Flink JDBC driver in your project and use it directly. Most applications may use data access frameworks to access data, for example, JOOQ, MyBatis and Spring Data. You can config Flink JDBC driver in them to perform Flink queries on an exist Flink cluster, just like a regular database. diff --git a/docs/content.zh/docs/sql/reference/queries/joins.md b/docs/content.zh/docs/sql/reference/queries/joins.md index d855f1fd2328ee..8f58f754279068 100644 --- a/docs/content.zh/docs/sql/reference/queries/joins.md +++ b/docs/content.zh/docs/sql/reference/queries/joins.md @@ -472,7 +472,7 @@ Because every probe-side row is joined against the final, complete build side, t Lookup Join -------------- -lookup join 通常用于使用从外部系统查询的数据来丰富表。join 要求一个表具有处理时间属性,另一个表由查找源连接器(lookup source connnector)支持。 +lookup join 通常用于使用从外部系统查询的数据来丰富表。join 要求一个表具有处理时间属性,另一个表由查找源连接器(lookup source connector)支持。 lookup join 和上面的 [处理时间 Temporal Join](#processing-time-temporal-join) 语法相同,右表使用查找源连接器支持。 diff --git a/docs/content.zh/docs/sql/reference/queries/window-agg.md b/docs/content.zh/docs/sql/reference/queries/window-agg.md index 2ebc7d1af1d051..3de58a4c7cce0c 100644 --- a/docs/content.zh/docs/sql/reference/queries/window-agg.md +++ b/docs/content.zh/docs/sql/reference/queries/window-agg.md @@ -307,7 +307,7 @@ SELECT window_start, window_end, SUM(partial_price) AS total_price SESSION_END(time_attr, interval)

返回相应滚动窗口,跳跃窗口或会话窗口的上限的时间戳(exclusive),即窗口结束时间。

-

注意: 上限时间戳(exlusive)不能作为 }}">rowtime attribute 用于后续基于时间的操作,例如:}}#interval-joins">interval joins 和 }}">group window 或 }}">over window aggregations。

+

注意: 上限时间戳(exclusive)不能作为 }}">rowtime attribute 用于后续基于时间的操作,例如:}}#interval-joins">interval joins 和 }}">group window 或 }}">over window aggregations。

diff --git a/docs/content/docs/connectors/datastream/formats/text_files.md b/docs/content/docs/connectors/datastream/formats/text_files.md index e194e2924234db..e3e19d95d37308 100644 --- a/docs/content/docs/connectors/datastream/formats/text_files.md +++ b/docs/content/docs/connectors/datastream/formats/text_files.md @@ -74,7 +74,7 @@ In this example, we create a DataStream containing the lines of text files as St as new files are added to the directory. We monitor for new files each second. There is no need for a watermark strategy as records do not contain event timestamps. -{{< tabs "continous" >}} +{{< tabs "continuous" >}} {{< tab "Java" >}} ```java final FileSource source = diff --git a/docs/content/docs/connectors/table/formats/protobuf.md b/docs/content/docs/connectors/table/formats/protobuf.md index 3651452aec25d5..49899994aa537e 100644 --- a/docs/content/docs/connectors/table/formats/protobuf.md +++ b/docs/content/docs/connectors/table/formats/protobuf.md @@ -132,7 +132,7 @@ Format Options no (none) String - The full name of a Protobuf generated class. The name must match the message name in the proto definition file. $ is supported for inner class names, like 'com.exmample.OuterClass$MessageClass' + The full name of a Protobuf generated class. The name must match the message name in the proto definition file. $ is supported for inner class names, like 'com.example.OuterClass$MessageClass'
protobuf.ignore-parse-errors
diff --git a/docs/content/docs/deployment/adaptive_batch.md b/docs/content/docs/deployment/adaptive_batch.md index b5b41b0472f503..f130f973e1ced1 100644 --- a/docs/content/docs/deployment/adaptive_batch.md +++ b/docs/content/docs/deployment/adaptive_batch.md @@ -59,7 +59,7 @@ To automatically decide parallelisms for operators with Adaptive Batch Scheduler - [`execution.batch.adaptive.auto-parallelism.min-parallelism`]({{< ref "docs/deployment/config" >}}#execution-batch-adaptive-auto-parallelism-min-parallelism): The lower bound of allowed parallelism to set adaptively. - [`execution.batch.adaptive.auto-parallelism.max-parallelism`]({{< ref "docs/deployment/config" >}}#execution-batch-adaptive-auto-parallelism-max-parallelism): The upper bound of allowed parallelism to set adaptively. The default parallelism set via [`parallelism.default`]({{< ref "docs/deployment/config" >}}) or `StreamExecutionEnvironment#setParallelism()` will be used as upper bound of allowed parallelism if this configuration is not configured. - [`execution.batch.adaptive.auto-parallelism.avg-data-volume-per-task`]({{< ref "docs/deployment/config" >}}#execution-batch-adaptive-auto-parallelism-avg-data-volume-per-ta): The average size of data volume to expect each task instance to process. Note that when data skew occurs, or the decided parallelism reaches the max parallelism (due to too much data), the data actually processed by some tasks may far exceed this value. - - [`execution.batch.adaptive.auto-parallelism.default-source-parallelism`]({{< ref "docs/deployment/config" >}}#execution-batch-adaptive-auto-parallelism-default-source-paralle): The default parallelism of data source or the upper bound of source parallelism to set adaptively. The upper bound of allowed parallelism set via [`execution.batch.adaptive.auto-parallelism.max-parallelism`]({{< ref "docs/deployment/config" >}}#execution-batch-adaptive-auto-parallelism-max-parallelism) will be used if this configuration is not configured. If the upper bound of allowed parallelism is also not configured, the default parallelism set via [`parallelism.default`]({{< ref "docs/deployment/config" >}}) or `StreamExecutionEnvironment#setParallelism()` will be used instead. + - [`execution.batch.adaptive.auto-parallelism.default-source-parallelism`]({{< ref "docs/deployment/config" >}}#execution-batch-adaptive-auto-parallelism-default-source-parallelism): The default parallelism of data source or the upper bound of source parallelism to set adaptively. The upper bound of allowed parallelism set via [`execution.batch.adaptive.auto-parallelism.max-parallelism`]({{< ref "docs/deployment/config" >}}#execution-batch-adaptive-auto-parallelism-max-parallelism) will be used if this configuration is not configured. If the upper bound of allowed parallelism is also not configured, the default parallelism set via [`parallelism.default`]({{< ref "docs/deployment/config" >}}) or `StreamExecutionEnvironment#setParallelism()` will be used instead. - Avoid setting the parallelism of operators: @@ -77,7 +77,7 @@ The Context will provide the upper bound for the inferred parallelism, the expec The Adaptive Batch Scheduler will invoke the interface before scheduling the source vertices, and it should be noted that implementations should avoid time-consuming operations as much as possible. -If the Source does not implement the interface, the configuration setting [`execution.batch.adaptive.auto-parallelism.default-source-parallelism`]({{< ref "docs/deployment/config" >}}#execution-batch-adaptive-auto-parallelism-default-source-paralle) will be used as the parallelism of the source vertices. +If the Source does not implement the interface, the configuration setting [`execution.batch.adaptive.auto-parallelism.default-source-parallelism`]({{< ref "docs/deployment/config" >}}#execution-batch-adaptive-auto-parallelism-default-source-parallelism) will be used as the parallelism of the source vertices. Note that the dynamic source parallelism inference only decides the parallelism for source operators which do not already have a specified parallelism. diff --git a/docs/content/docs/deployment/filesystems/azure.md b/docs/content/docs/deployment/filesystems/azure.md index 69fb019db10026..03cf318444ecd0 100644 --- a/docs/content/docs/deployment/filesystems/azure.md +++ b/docs/content/docs/deployment/filesystems/azure.md @@ -50,7 +50,7 @@ wasb://@$.blob.core.windows.net/@$.blob.core.windows.net/ -// ABFS unecrypted access +// ABFS unencrypted access abfs://@$.dfs.core.windows.net/ // ABFS SSL encrypted access diff --git a/docs/content/docs/deployment/security/security-ssl.md b/docs/content/docs/deployment/security/security-ssl.md index 648888793968fe..4f5c5856bf6935 100644 --- a/docs/content/docs/deployment/security/security-ssl.md +++ b/docs/content/docs/deployment/security/security-ssl.md @@ -61,7 +61,7 @@ added to the container images, or attached to the YARN deployment. - In an environment where operators are constrained to use firm-wide Internal CA (cannot generated self-signed certificates), the recommendation is to still have a dedicated key pair / certificate for the Flink deployment, signed by that CA. - However, the TrustStore must then also contain the CA's public certificate tho accept the deployment's certificate + However, the TrustStore must then also contain the CA's public certificate to accept the deployment's certificate during the SSL handshake (requirement in JDK TrustStore implementation). **NOTE:** Because of that, it is critical that you specify the fingerprint of the deployment certificate diff --git a/docs/content/docs/dev/datastream/java_lambdas.md b/docs/content/docs/dev/datastream/java_lambdas.md index 6e871e2a42d145..931573d7eb18d8 100644 --- a/docs/content/docs/dev/datastream/java_lambdas.md +++ b/docs/content/docs/dev/datastream/java_lambdas.md @@ -64,7 +64,7 @@ org.apache.flink.api.common.functions.InvalidTypesException: The generic type pa Otherwise the type has to be specified explicitly using type information. ``` -In this case, the type information needs to be *specified explicitly*, otherwise the output will be treated as type `Object` which leads to unefficient serialization. +In this case, the type information needs to be *specified explicitly*, otherwise the output will be treated as type `Object` which leads to inefficient serialization. ```java DataStream input = env.fromData(1, 2, 3); diff --git a/docs/content/docs/getting-started/flink-operations-playground.md b/docs/content/docs/getting-started/flink-operations-playground.md index 5fbfc3106c9a43..b319dd673d39f6 100644 --- a/docs/content/docs/getting-started/flink-operations-playground.md +++ b/docs/content/docs/getting-started/flink-operations-playground.md @@ -546,7 +546,7 @@ The endpoint depends on the scope of these metrics. Metrics scoped to a Job can **Request** ```bash -curl "localhost:8081/jobs//metrics?get=lastCheckpointSize" +curl "localhost:8081/jobs//metrics?get=lastCheckpointSize" ``` **Expected Response (pretty-printed; no placeholders)** ```json @@ -564,7 +564,7 @@ about the status of a running Job. **Request** ```bash # find the vertex-id of the vertex of interest -curl localhost:8081/jobs/ +curl localhost:8081/jobs/ ``` **Expected Response (pretty-printed)** diff --git a/docs/content/docs/sql/hive-compatibility/hive-dialect/alter.md b/docs/content/docs/sql/hive-compatibility/hive-dialect/alter.md index 5c32af26d506a2..d457dfdcfd4721 100644 --- a/docs/content/docs/sql/hive-compatibility/hive-dialect/alter.md +++ b/docs/content/docs/sql/hive-compatibility/hive-dialect/alter.md @@ -250,7 +250,7 @@ ALTER TABLE table_name [PARTITION partition_spec] CHANGE [COLUMN] col_old_name c ```sql ALTER TABLE t1 CHANGE COLUMN c1 new_c1 STRING FIRST; -ALTER TABLE t1 CHANGE COLUMN c1 new_c1 STRING AFRER c2; +ALTER TABLE t1 CHANGE COLUMN c1 new_c1 STRING AFTER c2; ``` #### Add/Replace Columns diff --git a/docs/content/docs/sql/reference/queries/vector-search.md b/docs/content/docs/sql/reference/queries/vector-search.md index 18d4160b39b5ce..92267dcb66991a 100644 --- a/docs/content/docs/sql/reference/queries/vector-search.md +++ b/docs/content/docs/sql/reference/queries/vector-search.md @@ -93,7 +93,7 @@ input_table, LATERAL VECTOR_SEARCH( CONFIG => MAP['async', 'true', 'timeout', '100s'] ); --- Searching with contant value +-- Searching with constant value SELECT * FROM TABLE(VECTOR_SEARCH( TABLE vector_table, diff --git a/docs/content/docs/sql/reference/utility/explain.md b/docs/content/docs/sql/reference/utility/explain.md index 168b9b1240a1cf..f162a804dc841e 100644 --- a/docs/content/docs/sql/reference/utility/explain.md +++ b/docs/content/docs/sql/reference/utility/explain.md @@ -340,7 +340,7 @@ TableSourceScan(..., cumulative cost ={1.0E8 rows, 1.0E8 cpu, 2.4E9 io, 0.0 netw **CHANGELOG_MODE** -Specify `CHANGELOG_MODE` will inform the optimizer to attach the changelog mode (see more details at [Dynamic Tables]({{< ref "docs/concepts/sql-table-concepts/dynamic_tables" >}}#table-to-stream-conversion)) of each physical rel node to the ouptput. +Specify `CHANGELOG_MODE` will inform the optimizer to attach the changelog mode (see more details at [Dynamic Tables]({{< ref "docs/concepts/sql-table-concepts/dynamic_tables" >}}#table-to-stream-conversion)) of each physical rel node to the output. ```text == Optimized Physical Plan == diff --git a/docs/data/sql_connectors.yml b/docs/data/sql_connectors.yml index e98a1a64811c91..fd71aaeffa0d8b 100644 --- a/docs/data/sql_connectors.yml +++ b/docs/data/sql_connectors.yml @@ -95,7 +95,7 @@ maxwell: ogg-json: name: Ogg maven: flink-json - catagory: format + category: format builtin: true csv: diff --git a/docs/data/sql_functions_zh.yml b/docs/data/sql_functions_zh.yml index e87ca93181dbdf..5cdb1b52e43d54 100644 --- a/docs/data/sql_functions_zh.yml +++ b/docs/data/sql_functions_zh.yml @@ -18,7 +18,7 @@ comparison: - sql: value1 = value2 table: value1 === value2 - description: 如果 value1 等于 value2 返回 `TRUE`;如果 value1 或者 value2 为 `NULL` 返回 `UNKNOW`。 + description: 如果 value1 等于 value2 返回 `TRUE`;如果 value1 或者 value2 为 `NULL` 返回 `UNKNOWN`。 - sql: value1 <> value2 table: value1 !== value2 description: 如果 value1 不等于 value2 返回 `TRUE`;如果 value1 或 value2 为 `NULL` 返回 `UNKNOWN`。 @@ -818,7 +818,7 @@ temporal: - sql: FROM_UNIXTIME(numeric[, string]) table: fromUnixtime(NUMERIC[, STRING]) description: | - 以格式 string(默认为 'yyyy-MM-dd HH:mm:ss')表示数字参数 numberic 的值。numeric 是一个内部 + 以格式 string(默认为 'yyyy-MM-dd HH:mm:ss')表示数字参数 numeric 的值。numeric 是一个内部 时间戳值,表示自'1970-01-01 00:00:00' UTC 以来的秒数,由 UNIX_TIMESTAMP() 函数生成。返回值以会话时区表示 (在 TableConfig 中指定)。例如,如果在 UTC 时区,FROM_UNIXTIME(44) 返回 '1970-01-01 00:00:44',如果在 'Asia/Tokyo' 时区,则返回 '1970-01-01 09:00:44'。 diff --git a/docs/layouts/partials/docs/inject/menu-after.html b/docs/layouts/partials/docs/inject/menu-after.html index 7f92938dd837a5..7f53f2d729c061 100644 --- a/docs/layouts/partials/docs/inject/menu-after.html +++ b/docs/layouts/partials/docs/inject/menu-after.html @@ -54,7 +54,7 @@ - + {{ $translations := dict }} {{ range .Site.Home.AllTranslations }} {{ $translations = merge $translations (dict .Language.Lang .) }} diff --git a/docs/layouts/partials/docs/simple-title.html b/docs/layouts/partials/docs/simple-title.html index b324d481841c83..b1a4cd22476a5b 100644 --- a/docs/layouts/partials/docs/simple-title.html +++ b/docs/layouts/partials/docs/simple-title.html @@ -17,7 +17,7 @@ under the License. --> {{ $title := "" }} diff --git a/docs/layouts/shortcodes/beta.html b/docs/layouts/shortcodes/beta.html index ddb7bda0a32da0..e89712f432e2c7 100644 --- a/docs/layouts/shortcodes/beta.html +++ b/docs/layouts/shortcodes/beta.html @@ -20,6 +20,6 @@ */}}
This feature is currency marked as BETA and in an evolving state. - As such, there are no guaruntees made about feature stability + As such, there are no guarantees made about feature stability and breaking changes may occur in future Flink versions.
\ No newline at end of file diff --git a/docs/layouts/shortcodes/center.html b/docs/layouts/shortcodes/center.html index ed9d728dc25f5d..acfba1aabb67c9 100644 --- a/docs/layouts/shortcodes/center.html +++ b/docs/layouts/shortcodes/center.html @@ -18,7 +18,7 @@ */}}{{/* Shortcode for centering text - Parmeters: markdown text + Parameters: markdown text */}}
{{ .Inner | markdownify }} diff --git a/docs/layouts/shortcodes/gh_link.html b/docs/layouts/shortcodes/gh_link.html index cb9a8e18c3de1d..d3b43428fa8197 100644 --- a/docs/layouts/shortcodes/gh_link.html +++ b/docs/layouts/shortcodes/gh_link.html @@ -19,7 +19,7 @@ Shortcode for linking to a file in github. This shortcode will automatically discover the repo and correct branch. - Parmeters: + Parameters: - file: The absolute path to the image file (required) - name: The rendered link name (required) */}} diff --git a/docs/layouts/shortcodes/github_repo.html b/docs/layouts/shortcodes/github_repo.html index 845316f02e93c5..e81ff7cd254e57 100644 --- a/docs/layouts/shortcodes/github_repo.html +++ b/docs/layouts/shortcodes/github_repo.html @@ -18,5 +18,5 @@ */}}{{/* Shortcode that interpolates the full github repo - Parmeters: None + Parameters: None */}}{{- $.Site.Params.GithubRepo -}} diff --git a/docs/layouts/shortcodes/img.html b/docs/layouts/shortcodes/img.html index e87056aa021094..064df64b72d3b5 100644 --- a/docs/layouts/shortcodes/img.html +++ b/docs/layouts/shortcodes/img.html @@ -21,7 +21,7 @@ because we can configure the HTML image tag properties. - Parmeters: + Parameters: - src: The absolute path to the image file (required) - alt: Image alt text (optional) - width: Image width (optional) diff --git a/docs/layouts/shortcodes/label.html b/docs/layouts/shortcodes/label.html index 2a1f39b159b7ac..0d90ffc77505fb 100644 --- a/docs/layouts/shortcodes/label.html +++ b/docs/layouts/shortcodes/label.html @@ -21,7 +21,7 @@ because we can configure the HTML image tag properties. - Parmeters: + Parameters: - src: The absolute path to the image file (required) - alt: Image alt text (optional) - width: Image width (optional) diff --git a/docs/layouts/shortcodes/scala_version.html b/docs/layouts/shortcodes/scala_version.html index b77c77e7f3725a..dadf5848402f90 100644 --- a/docs/layouts/shortcodes/scala_version.html +++ b/docs/layouts/shortcodes/scala_version.html @@ -18,5 +18,5 @@ */}}{{/* Shortcode for interpolating the scala version set in conf.toml - Parmeters: None + Parameters: None */}}{{- $.Site.Params.ScalaVersion -}} \ No newline at end of file diff --git a/docs/layouts/shortcodes/stable.html b/docs/layouts/shortcodes/stable.html index 1a395d679f018e..c4015e4fd75900 100644 --- a/docs/layouts/shortcodes/stable.html +++ b/docs/layouts/shortcodes/stable.html @@ -19,5 +19,5 @@ Shortcode that only renders its contents if the site is marked as stable. - Parmeters: Markdown text + Parameters: Markdown text */}}{{ if $.Site.Params.IsStable }}{{ .Inner | markdownify }}{{ end }} \ No newline at end of file diff --git a/docs/layouts/shortcodes/top.html b/docs/layouts/shortcodes/top.html index 11d6808bd58e6b..93da68e0e51559 100644 --- a/docs/layouts/shortcodes/top.html +++ b/docs/layouts/shortcodes/top.html @@ -18,7 +18,7 @@ */}}{{/* Shortcode that adds a "Back to Top" link. - Parmeters: None + Parameters: None */}}

Back to top

diff --git a/docs/layouts/shortcodes/training_link.html b/docs/layouts/shortcodes/training_link.html index 2f0e3cb5d8a72e..05212371848405 100644 --- a/docs/layouts/shortcodes/training_link.html +++ b/docs/layouts/shortcodes/training_link.html @@ -19,7 +19,7 @@ Shortcode for linking to a file in the training repo github. This shortcode will automatically discover the repo and correct branch. - Parmeters: + Parameters: - file: The absolute path to the image file (required) - name: The rendered link name (required) */}} diff --git a/docs/layouts/shortcodes/training_repo.html b/docs/layouts/shortcodes/training_repo.html index 939f334facc546..90ed3addb69e7a 100644 --- a/docs/layouts/shortcodes/training_repo.html +++ b/docs/layouts/shortcodes/training_repo.html @@ -19,7 +19,7 @@ Shortcode for linking to a file in the training repo github. This shortcode will automatically discover the repo and correct branch. - Parmeters: + Parameters: - file: The absolute path to the image file (required) - name: The rendered link name (required) */}} diff --git a/docs/layouts/shortcodes/unstable.html b/docs/layouts/shortcodes/unstable.html index 6ad4c173b6b6c9..324f15282423e4 100644 --- a/docs/layouts/shortcodes/unstable.html +++ b/docs/layouts/shortcodes/unstable.html @@ -19,5 +19,5 @@ Shortcode that only renders its contents if the site is not marked as stable. - Parmeters: Markdown text + Parameters: Markdown text */}}{{ if (not $.Site.Params.IsStable) }}{{ .Inner | markdownify }}{{ end }} \ No newline at end of file diff --git a/docs/layouts/shortcodes/version.html b/docs/layouts/shortcodes/version.html index 7360ee5c3dbe0d..ac543278e244d2 100644 --- a/docs/layouts/shortcodes/version.html +++ b/docs/layouts/shortcodes/version.html @@ -18,5 +18,5 @@ */}}{{/* Shortcode that interpolates the full maven version (x.y.z) - Parmeters: None + Parameters: None */}}{{- $.Site.Params.Version -}} diff --git a/docs/static/js/flink.js b/docs/static/js/flink.js index bd981b99ecd6b9..6a7ffb48458baa 100644 --- a/docs/static/js/flink.js +++ b/docs/static/js/flink.js @@ -21,7 +21,7 @@ * Function to synchronize all tabs on a page to a given user selection. * * The selection of a tab group should only change if it contains an - * input with the given tabId. Otherwise, its current seletion should + * input with the given tabId. Otherwise, its current selection should * remain unchanged. * * See layouts/shortcodes/tabs.html