diff --git a/README.md b/README.md
index 12e5c64..ff6996e 100644
--- a/README.md
+++ b/README.md
@@ -1,70 +1,77 @@
 # cpp-beginner-projects
 
 ## 📖 Overview
-This repository contains beginner-friendly C++ projects created while learning programming fundamentals.
+This repository contains beginner-friendly C++ console projects to practice programming fundamentals through small, practical programs.
 
-It is designed to practice:
-- Input / Output
-- Conditional statements
+These projects mainly focus on:
+- Input and output
+- Conditional logic (`if/else`, `switch`)
 - Loops
-- Switch-case
-- Basic validation and calculations
+- Basic calculations and validation
 
 ---
 
-## ⚙️ Repository Structure
-Each `.cpp` file is an independent console program.
-
-### 📂 Projects
-- **Bill_Splitter.cpp** – Split a bill among multiple people.
-- **Cutoff_Checker.cpp** – Check pass/fail with overall and subject cutoffs.
-- **Day_Name_And_Type.cpp** – Find day name and identify weekday/weekend.
-- **Electricity_Bill_Calculator.cpp** – Calculate bill using unit slabs.
-- **Grade_Evaluator.cpp** – Evaluate grade from marks.
-- **Mini_ATM.cpp** – Basic ATM simulation (balance, deposit, withdraw).
-- **Movie_Ticket_Counter.cpp** – Calculate ticket amount by category.
-- **Petrol_Pump_Dispensor.cpp** – Fuel billing by amount or liters.
-- **Simple_Calculator.cpp** – Perform basic arithmetic operations.
-- **Smart_Card_Fare_System.cpp** – Metro fare and balance check system.
-- **Table_Maker.cpp** – Generate multiplication tables.
-- **Temperature_Converter.cpp** – Convert Celsius and Fahrenheit.
-- **Voting_Eligibility_Checker.cpp** – Check voting eligibility by age.
-- **Water_State_Checker.cpp** – Determine water state from temperature.
+## ⚙️ How This Repository Works
+- Each `.cpp` file is an independent project.
+- You can compile and run each project separately.
+- Every project has its own detailed README in [`project-readmes/`](./project-readmes/) with:
+  - Overview
+  - How It Works
+  - Requirements
+  - Compile & Run
+
+---
+
+## 📂 Projects and Detailed READMEs
+1. [Bill Splitter](./project-readmes/Bill_Splitter.md)
+2. [Cutoff Checker](./project-readmes/Cutoff_Checker.md)
+3. [Day Name And Type](./project-readmes/Day_Name_And_Type.md)
+4. [Electricity Bill Calculator](./project-readmes/Electricity_Bill_Calculator.md)
+5. [Grade Evaluator](./project-readmes/Grade_Evaluator.md)
+6. [Mini ATM](./project-readmes/Mini_ATM.md)
+7. [Movie Ticket Counter](./project-readmes/Movie_Ticket_Counter.md)
+8. [Petrol Pump Dispensor](./project-readmes/Petrol_Pump_Dispensor.md)
+9. [Simple Calculator](./project-readmes/Simple_Calculator.md)
+10. [Smart Card Fare System](./project-readmes/Smart_Card_Fare_System.md)
+11. [Table Maker](./project-readmes/Table_Maker.md)
+12. [Temperature Converter](./project-readmes/Temperature_Converter.md)
+13. [Voting Eligibility Checker](./project-readmes/Voting_Eligibility_Checker.md)
+14. [Water State Checker](./project-readmes/Water_State_Checker.md)
 
 ---
 
 ## 🛠️ Requirements
-- A C++ compiler (e.g., `g++`)
+- A C++ compiler (for example, `g++`)
 - Terminal / command prompt
 
 ---
 
-## ▶️ How to Run
+## ▶️ How to Run Any Project
 1. Clone the repository:
    ```bash
    git clone https://github.com/yash-kumar-18/cpp-beginner-projects.git
    cd cpp-beginner-projects
    ```
 
-2. Compile any file (example: `Simple_Calculator.cpp`):
+2. Compile a project (example: `Simple_Calculator.cpp`):
    ```bash
    g++ Simple_Calculator.cpp -o Simple_Calculator
    ```
 
-3. Run the program:
+3. Run it:
    ```bash
    ./Simple_Calculator
    ```
 
-4. Repeat the same steps for any other `.cpp` file.
+> Repeat the same compile-and-run process for other `.cpp` files.
 
 ---
 
 ## 📄 License
 This project is licensed under the **MIT License**.
-See the full license text in the [`LICENSE`](./LICENSE) file.
+See [`LICENSE`](./LICENSE) for full details.
 
 ---
 
 ## 🎯 Goal
-To build strong C++ basics through small and practical projects.
+Build strong C++ basics with project-based learning.
diff --git a/project-readmes/Bill_Splitter.md b/project-readmes/Bill_Splitter.md
new file mode 100644
index 0000000..ae7a03a
--- /dev/null
+++ b/project-readmes/Bill_Splitter.md
@@ -0,0 +1,20 @@
+# Bill_Splitter.cpp
+
+## Overview
+This project splits a total bill amount among multiple people.
+
+## How It Works
+- Takes total bill amount as input.
+- Takes total number of persons.
+- Validates that persons are not zero.
+- Calculates and prints bill per person.
+
+## Requirements
+- C++ compiler (`g++`)
+- Terminal
+
+## Compile & Run
+```bash
+g++ Bill_Splitter.cpp -o Bill_Splitter
+./Bill_Splitter
+```
diff --git a/project-readmes/Cutoff_Checker.md b/project-readmes/Cutoff_Checker.md
new file mode 100644
index 0000000..0cd4ef3
--- /dev/null
+++ b/project-readmes/Cutoff_Checker.md
@@ -0,0 +1,21 @@
+# Cutoff_Checker.cpp
+
+## Overview
+This project checks pass/fail status using overall marks and individual subject cutoffs.
+
+## How It Works
+- Accepts theory and practical marks.
+- Validates both marks are between 0 and 50.
+- Checks overall cutoff (total at least 40).
+- Checks individual cutoffs (theory and practical at least 15 each).
+- Prints pass/fail reason.
+
+## Requirements
+- C++ compiler (`g++`)
+- Terminal
+
+## Compile & Run
+```bash
+g++ Cutoff_Checker.cpp -o Cutoff_Checker
+./Cutoff_Checker
+```
diff --git a/project-readmes/Day_Name_And_Type.md b/project-readmes/Day_Name_And_Type.md
new file mode 100644
index 0000000..bbd85e7
--- /dev/null
+++ b/project-readmes/Day_Name_And_Type.md
@@ -0,0 +1,20 @@
+# Day_Name_And_Type.cpp
+
+## Overview
+This project maps a day number (1 to 7) to day name and identifies weekday/weekend.
+
+## How It Works
+- Accepts a day number input.
+- Uses `switch` to print the corresponding day name.
+- Validates valid range (1 to 7).
+- Uses another `switch` to print whether the day is a weekday or weekend.
+
+## Requirements
+- C++ compiler (`g++`)
+- Terminal
+
+## Compile & Run
+```bash
+g++ Day_Name_And_Type.cpp -o Day_Name_And_Type
+./Day_Name_And_Type
+```
diff --git a/project-readmes/Electricity_Bill_Calculator.md b/project-readmes/Electricity_Bill_Calculator.md
new file mode 100644
index 0000000..f5dad98
--- /dev/null
+++ b/project-readmes/Electricity_Bill_Calculator.md
@@ -0,0 +1,24 @@
+# Electricity_Bill_Calculator.cpp
+
+## Overview
+This project calculates electricity bill using slab-based per-unit charges.
+
+## How It Works
+- Takes total units consumed.
+- Applies slab rates:
+  - Up to 100 units: 5 per unit
+  - 101 to 200 units: 7 per unit
+  - 201 to 300 units: 9 per unit
+  - Above 300 units: 11 per unit
+- Validates units are non-negative.
+- Prints final bill amount.
+
+## Requirements
+- C++ compiler (`g++`)
+- Terminal
+
+## Compile & Run
+```bash
+g++ Electricity_Bill_Calculator.cpp -o Electricity_Bill_Calculator
+./Electricity_Bill_Calculator
+```
diff --git a/project-readmes/Grade_Evaluator.md b/project-readmes/Grade_Evaluator.md
new file mode 100644
index 0000000..4a9decd
--- /dev/null
+++ b/project-readmes/Grade_Evaluator.md
@@ -0,0 +1,24 @@
+# Grade_Evaluator.cpp
+
+## Overview
+This project evaluates grade based on entered marks.
+
+## How It Works
+- Accepts marks input.
+- Uses `if/else if` ranges to assign grades:
+  - A: 90 and above
+  - B: 75 to 89
+  - C: 50 to 74
+  - D (Pass): 33 to 49
+  - F (Fail): below 33
+- Prints the grade.
+
+## Requirements
+- C++ compiler (`g++`)
+- Terminal
+
+## Compile & Run
+```bash
+g++ Grade_Evaluator.cpp -o Grade_Evaluator
+./Grade_Evaluator
+```
diff --git a/project-readmes/Mini_ATM.md b/project-readmes/Mini_ATM.md
new file mode 100644
index 0000000..ecd04c0
--- /dev/null
+++ b/project-readmes/Mini_ATM.md
@@ -0,0 +1,21 @@
+# Mini_ATM.cpp
+
+## Overview
+This project simulates basic ATM operations with a starting balance.
+
+## How It Works
+- Starts with a default balance of 1000.
+- Shows menu options: check balance, deposit, withdraw, exit.
+- Validates positive deposit/withdrawal amounts.
+- Checks balance before withdrawal.
+- Prints result based on selected option.
+
+## Requirements
+- C++ compiler (`g++`)
+- Terminal
+
+## Compile & Run
+```bash
+g++ Mini_ATM.cpp -o Mini_ATM
+./Mini_ATM
+```
diff --git a/project-readmes/Movie_Ticket_Counter.md b/project-readmes/Movie_Ticket_Counter.md
new file mode 100644
index 0000000..9ab66f9
--- /dev/null
+++ b/project-readmes/Movie_Ticket_Counter.md
@@ -0,0 +1,24 @@
+# Movie_Ticket_Counter.cpp
+
+## Overview
+This project calculates movie ticket total based on screen type, age, and number of persons.
+
+## How It Works
+- Lets user select ticket category:
+  - Standard
+  - IMAX 3D
+  - VIP Lounge
+- Accepts age and number of tickets.
+- Applies VIP pricing with senior-citizen discount for age 60+.
+- Validates menu choice, age, and ticket count.
+- Prints total payable amount.
+
+## Requirements
+- C++ compiler (`g++`)
+- Terminal
+
+## Compile & Run
+```bash
+g++ Movie_Ticket_Counter.cpp -o Movie_Ticket_Counter
+./Movie_Ticket_Counter
+```
diff --git a/project-readmes/Petrol_Pump_Dispensor.md b/project-readmes/Petrol_Pump_Dispensor.md
new file mode 100644
index 0000000..2b80e66
--- /dev/null
+++ b/project-readmes/Petrol_Pump_Dispensor.md
@@ -0,0 +1,23 @@
+# Petrol_Pump_Dispensor.cpp
+
+## Overview
+This project simulates fuel billing by fuel type and dispensing mode.
+
+## How It Works
+- Lets user choose fuel type (Petrol, Diesel, CNG).
+- Lets user choose dispensing mode:
+  - By amount (Rs)
+  - By volume (L)
+- Validates fuel type and mode choices.
+- Validates entered amount/volume is greater than zero.
+- Calculates either fuel quantity from amount or bill amount from volume.
+
+## Requirements
+- C++ compiler (`g++`)
+- Terminal
+
+## Compile & Run
+```bash
+g++ Petrol_Pump_Dispensor.cpp -o Petrol_Pump_Dispensor
+./Petrol_Pump_Dispensor
+```
diff --git a/project-readmes/Simple_Calculator.md b/project-readmes/Simple_Calculator.md
new file mode 100644
index 0000000..f15e9e9
--- /dev/null
+++ b/project-readmes/Simple_Calculator.md
@@ -0,0 +1,21 @@
+# Simple_Calculator.cpp
+
+## Overview
+This project performs basic arithmetic operations between two numbers.
+
+## How It Works
+- Accepts two numbers.
+- Accepts an operator (`+`, `-`, `*`, `/`).
+- Uses `switch` to run the selected operation.
+- Handles division by zero with an error message.
+- Shows error for invalid operator input.
+
+## Requirements
+- C++ compiler (`g++`)
+- Terminal
+
+## Compile & Run
+```bash
+g++ Simple_Calculator.cpp -o Simple_Calculator
+./Simple_Calculator
+```
diff --git a/project-readmes/Smart_Card_Fare_System.md b/project-readmes/Smart_Card_Fare_System.md
new file mode 100644
index 0000000..1e53477
--- /dev/null
+++ b/project-readmes/Smart_Card_Fare_System.md
@@ -0,0 +1,21 @@
+# Smart_Card_Fare_System.cpp
+
+## Overview
+This project calculates metro fare between sectors and checks card balance deduction.
+
+## How It Works
+- Starts with fixed smart card balance of 200.
+- Accepts departure and destination points (1 to 5).
+- Validates points and prevents same entry/exit.
+- Calculates fare as distance between points × 10.
+- Checks sufficient balance and prints remaining balance.
+
+## Requirements
+- C++ compiler (`g++`)
+- Terminal
+
+## Compile & Run
+```bash
+g++ Smart_Card_Fare_System.cpp -o Smart_Card_Fare_System
+./Smart_Card_Fare_System
+```
diff --git a/project-readmes/Table_Maker.md b/project-readmes/Table_Maker.md
new file mode 100644
index 0000000..21d2379
--- /dev/null
+++ b/project-readmes/Table_Maker.md
@@ -0,0 +1,20 @@
+# Table_Maker.cpp
+
+## Overview
+This project generates a multiplication table for a given number.
+
+## How It Works
+- Accepts a number for table generation.
+- Accepts a limit up to which table should be printed.
+- Validates that number is greater than zero.
+- Uses a loop to print multiplication results from 1 to limit.
+
+## Requirements
+- C++ compiler (`g++`)
+- Terminal
+
+## Compile & Run
+```bash
+g++ Table_Maker.cpp -o Table_Maker
+./Table_Maker
+```
diff --git a/project-readmes/Temperature_Converter.md b/project-readmes/Temperature_Converter.md
new file mode 100644
index 0000000..e8157fa
--- /dev/null
+++ b/project-readmes/Temperature_Converter.md
@@ -0,0 +1,23 @@
+# Temperature_Converter.cpp
+
+## Overview
+This project converts temperature between Celsius and Fahrenheit.
+
+## How It Works
+- Lets user choose conversion direction:
+  - Celsius to Fahrenheit
+  - Fahrenheit to Celsius
+- Validates conversion option.
+- Performs selected conversion formula.
+- Supports repeated calculations using `y/n` prompt.
+- Validates repeat input.
+
+## Requirements
+- C++ compiler (`g++`)
+- Terminal
+
+## Compile & Run
+```bash
+g++ Temperature_Converter.cpp -o Temperature_Converter
+./Temperature_Converter
+```
diff --git a/project-readmes/Voting_Eligibility_Checker.md b/project-readmes/Voting_Eligibility_Checker.md
new file mode 100644
index 0000000..617ee92
--- /dev/null
+++ b/project-readmes/Voting_Eligibility_Checker.md
@@ -0,0 +1,20 @@
+# Voting_Eligibility_Checker.cpp
+
+## Overview
+This project checks whether a person is eligible to vote based on age.
+
+## How It Works
+- Accepts age input.
+- Validates age is greater than zero.
+- If age is below 18, prints not eligible.
+- If age is 18 or above, prints eligible.
+
+## Requirements
+- C++ compiler (`g++`)
+- Terminal
+
+## Compile & Run
+```bash
+g++ Voting_Eligibility_Checker.cpp -o Voting_Eligibility_Checker
+./Voting_Eligibility_Checker
+```
diff --git a/project-readmes/Water_State_Checker.md b/project-readmes/Water_State_Checker.md
new file mode 100644
index 0000000..00e06b0
--- /dev/null
+++ b/project-readmes/Water_State_Checker.md
@@ -0,0 +1,20 @@
+# Water_State_Checker.cpp
+
+## Overview
+This project determines the physical state of water from input temperature.
+
+## How It Works
+- Accepts water temperature in Celsius.
+- If temperature is below 0, output is solid state.
+- If temperature is 100 or above, output is gaseous state.
+- Otherwise, output is liquid state.
+
+## Requirements
+- C++ compiler (`g++`)
+- Terminal
+
+## Compile & Run
+```bash
+g++ Water_State_Checker.cpp -o Water_State_Checker
+./Water_State_Checker
+```