Repository navigation
hi3518cv100_lite_dlink-dcs-2330l: D-Link DCS-2330L rev A #217
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Open
openipc-ai
wants to merge
3
commits into
master
Choose a base branch
from
hi3518cv100-dlink-dcs-2330l
base: master
Could not load branches
Branch not found: {{ refName }}
Loading
Could not load tags
Nothing to show
Loading
Are you sure you want to change the base?
Some commits from the old base branch may be removed from the timeline,
and old review comments may become outdated.
Open
Changes from all commits
Commits
Show all changes
3 commits
Select commit
Hold shift + click to select a range
File filter
Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
There are no files selected for viewing
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
67 changes: 67 additions & 0 deletions
67
..._dlink-dcs-2330l/br-ext-chip-hisilicon/configs/hi3518cv100_lite_dlink-dcs-2330l_defconfig
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,67 @@ | ||
| # Architecture | ||
| BR2_arm=y | ||
|
|
||
| # Toolchain | ||
| BR2_TOOLCHAIN_EXTERNAL=y | ||
| BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y | ||
| BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y | ||
| BR2_TOOLCHAIN_EXTERNAL_URL="https://github.com/openipc/firmware/releases/download/$(OPENIPC_TOOLCHAIN).tgz" | ||
| BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="arm-openipc-linux-musleabi" | ||
| BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_0=y | ||
| BR2_TOOLCHAIN_EXTERNAL_CUSTOM_MUSL=y | ||
| BR2_TOOLCHAIN_EXTERNAL_CXX=y | ||
|
|
||
| # Kernel | ||
| BR2_LINUX_KERNEL=y | ||
| BR2_LINUX_KERNEL_CUSTOM_TARBALL=y | ||
| BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/openipc/linux/archive/$(OPENIPC_KERNEL).tar.gz" | ||
| BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y | ||
| BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(EXTERNAL_VENDOR)/board/$(OPENIPC_SOC_FAMILY)/hi3518cv100.generic.config" | ||
| BR2_LINUX_KERNEL_UIMAGE=y | ||
| BR2_LINUX_KERNEL_XZ=y | ||
|
|
||
| # Filesystem | ||
| BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL)/package/busybox/busybox.config" | ||
| BR2_PACKAGE_UBOOT_TOOLS=y | ||
| BR2_PACKAGE_ZLIB=y | ||
| # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set | ||
| BR2_PACKAGE_WIRELESS_TOOLS=y | ||
| BR2_PACKAGE_WPA_SUPPLICANT=y | ||
| BR2_PACKAGE_WPA_SUPPLICANT_CLI=y | ||
| BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y | ||
| BR2_TARGET_ROOTFS_CPIO=y | ||
| BR2_TARGET_ROOTFS_SQUASHFS=y | ||
| BR2_TARGET_ROOTFS_SQUASHFS4_XZ=y | ||
|
|
||
| # OpenIPC | ||
| BR2_OPENIPC_SOC_VENDOR="hisilicon" | ||
| BR2_OPENIPC_SOC_MODEL="hi3518cv100" | ||
| BR2_OPENIPC_SOC_FAMILY="hi3516cv100" | ||
| BR2_OPENIPC_VARIANT="lite" | ||
| BR2_OPENIPC_FLASH_SIZE="8" | ||
|
|
||
| # Packages | ||
| BR2_PACKAGE_DROPBEAR_OPENIPC=y | ||
| BR2_PACKAGE_HISILICON_OPENSDK=y | ||
| BR2_PACKAGE_HISILICON_OSDRV_HI3516CV100=y | ||
| BR2_PACKAGE_IPCTOOL=y | ||
| BR2_PACKAGE_LIBCURL_OPENIPC=y | ||
| BR2_PACKAGE_LIBCURL_OPENIPC_CURL=y | ||
| # BR2_PACKAGE_LIBCURL_OPENIPC_PROXY_SUPPORT is not set | ||
| # BR2_PACKAGE_LIBCURL_OPENIPC_COOKIES_SUPPORT is not set | ||
| # BR2_PACKAGE_LIBCURL_OPENIPC_EXTRA_PROTOCOLS_FEATURES is not set | ||
| BR2_PACKAGE_LIBEVENT_OPENIPC=y | ||
| BR2_PACKAGE_LIBOGG_OPENIPC=y | ||
| BR2_PACKAGE_LINUX_FIRMWARE_OPENIPC=y | ||
| BR2_PACKAGE_LINUX_FIRMWARE_OPENIPC_RTL_8188EU=y | ||
| BR2_PACKAGE_MAJESTIC_FONTS=y | ||
| BR2_PACKAGE_MAJESTIC_WEBUI=y | ||
| BR2_PACKAGE_MAJESTIC=y | ||
| BR2_PACKAGE_MBEDTLS_OPENIPC=y | ||
| BR2_PACKAGE_MOTORS=y | ||
| BR2_PACKAGE_OPUS_OPENIPC=y | ||
| BR2_PACKAGE_RTL8188EUS_OPENIPC=y | ||
| BR2_PACKAGE_VTUND_OPENIPC=y | ||
| BR2_PACKAGE_YAML_CLI=y | ||
| BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_GENERAL_PATH)/scripts/post-image-split.sh" | ||
| BR2_OPENIPC_NOR_FIXED_PACKAGE=y |
89 changes: 89 additions & 0 deletions
89
devices/hi3518cv100_lite_dlink-dcs-2330l/general/overlay/etc/init.d/S96irled
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,89 @@ | ||
| #!/bin/sh | ||
| # | ||
| # The IR LEDs hang off PWM2, not a GPIO: lit at irled_duty percent (fw_env, | ||
| # default 35) while majestic holds the IR-cut (GPIO0) in night position, dark | ||
| # otherwise. PWM1 drives the heater and is never touched here. | ||
|
|
||
| DAEMON=/etc/init.d/S96irled | ||
| PIDFILE=/var/run/irled.pid | ||
|
|
||
| # Read on every switch to night, so fw_setenv irled_duty applies from the next | ||
| # one (or at once with a restart) without polling the flash every second. | ||
| # expr strips leading zeros: ash reads 08 in $(( )) as bad octal, 035 as 29. | ||
| duty() { | ||
| d=$(fw_printenv -n irled_duty 2>/dev/null) | ||
| case "$d" in | ||
| [0-9] | [0-9][0-9] | [0-9][0-9][0-9]) | ||
| d=$(expr "$d" + 0) | ||
| [ "$d" -le 100 ] || d=35 | ||
| ;; | ||
| *) d=35 ;; | ||
| esac | ||
| echo "$d" | ||
| } | ||
|
|
||
| pwm2() { | ||
| # 0x40 period, 0x44 duty, 0x48 count, 0x4c control; 150 at 3 MHz = 20 kHz. | ||
| # A new duty only latches across a disable/enable. | ||
| devmem 0x2013004c 32 0 | ||
| [ "$1" -eq 0 ] && return | ||
| devmem 0x20130040 32 150 | ||
| devmem 0x20130044 32 $(((150 * $1 + 50) / 100)) | ||
| devmem 0x20130048 32 10 | ||
| devmem 0x2013004c 32 5 | ||
| } | ||
|
|
||
| run() { | ||
| # The pad mux the stock kernel sets and this bootloader leaves at 1: | ||
| # GPIO0_5/SVB_PWM and GPIO0_6. | ||
| devmem 0x200f0134 32 0 | ||
| devmem 0x200f0138 32 0 | ||
| trap 'pwm2 0; exit 0' TERM INT | ||
| last= | ||
| while :; do | ||
| # Unreadable (majestic not up yet) counts as day: never leave them lit | ||
| night=$(cat /sys/class/gpio/gpio0/value 2>/dev/null) | ||
| [ "$night" = 1 ] || night=0 | ||
| if [ "$night" != "$last" ]; then | ||
| [ "$night" = 1 ] && pwm2 "$(duty)" || pwm2 0 | ||
| last=$night | ||
| fi | ||
| sleep 1 | ||
| done | ||
| } | ||
|
|
||
| case "$1" in | ||
| start) | ||
| printf "Starting IR LED control: " | ||
| start-stop-daemon -b -m -S -q -p $PIDFILE -x /bin/sh -- $DAEMON run | ||
| [ $? = 0 ] && echo "OK" || echo "FAIL" | ||
| ;; | ||
| stop) | ||
| printf "Stopping IR LED control: " | ||
| pid=$(cat $PIDFILE 2>/dev/null) | ||
| start-stop-daemon -K -q -p $PIDFILE | ||
| # Its trap turns PWM2 off after the current sleep; let it finish so | ||
| # a restart cannot have the old one darken what the new one lit. | ||
| n=0 | ||
| while [ -n "$pid" ] && kill -0 "$pid" 2>/dev/null && [ $n -lt 5 ]; do | ||
| sleep 1 | ||
| n=$((n + 1)) | ||
| done | ||
| if [ -n "$pid" ] && kill -0 "$pid" 2>/dev/null; then | ||
| echo "FAIL" | ||
| exit 1 | ||
| fi | ||
| rm -f $PIDFILE | ||
| echo "OK" | ||
| ;; | ||
| restart) | ||
| $0 stop && $0 start | ||
| ;; | ||
| run) | ||
| run | ||
| ;; | ||
| *) | ||
| echo "Usage: $0 {start|stop|restart}" | ||
| exit 1 | ||
| ;; | ||
| esac | ||
121 changes: 121 additions & 0 deletions
121
...518cv100_lite_dlink-dcs-2330l/general/overlay/etc/sensors/ov9712_i2c_dc_720p_dcs2330l.ini
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,121 @@ | ||
| [sensor] | ||
| Sensor_type =ov9712 ;sensor name | ||
| Mode =0 ;WDR_MODE_NONE = 0 | ||
| ;WDR_MODE_BUILT_IN = 1 | ||
| ;WDR_MODE_2To1_LINE = 2 | ||
| ;WDR_MODE_2To1_FRAME = 3 | ||
| ;WDR_MODE_2To1_FRAME_FULL_RATE =4 ...etc | ||
| DllFile =/usr/lib/sensors/libsns_ov9712_i2c_dc.so ;sensor lib path | ||
|
|
||
|
|
||
| [mode] | ||
| input_mode =4 ;INPUT_MODE_MIPI = 0 | ||
| ;INPUT_MODE_SUBLVDS = 1 | ||
| ;INPUT_MODE_LVDS = 2 ...etc | ||
|
|
||
| dev_attr = 2 ;mipi_dev_attr_t = 0 | ||
| ;lvds_dev_attr_t = 1 | ||
| ;NULL =2 | ||
|
|
||
| [isp_image] | ||
| Isp_x =0 | ||
| Isp_y =0 | ||
| Isp_W =1280 | ||
| Isp_H =720 | ||
| Isp_FrameRate=25 | ||
| Isp_Bayer =3 ;BAYER_RGGB=0, BAYER_GRBG=1, BAYER_GBRG=2, BAYER_BGGR=3 | ||
|
|
||
|
|
||
| [vi_dev] | ||
| Input_mod =2 ;VI_INPUT_MODE_BT656 = 0 | ||
| ;VI_INPUT_MODE_BT601, | ||
| ;VI_INPUT_MODE_DIGITAL_CAMERA | ||
| Work_mod =0 ;VI_WORK_MODE_1Multiplex = 0 | ||
| ;VI_WORK_MODE_2Multiplex, | ||
| ;VI_WORK_MODE_4Multiplex | ||
| Combine_mode =0 ;Y/C composite or separation mode | ||
| ;VI_COMBINE_COMPOSITE = 0 /*Composite mode */ | ||
| ;VI_COMBINE_SEPARATE, /*Separate mode */ | ||
| Comp_mode =0 ;Component mode (single-component or dual-component) | ||
| ;VI_COMP_MODE_SINGLE = 0, /*single component mode */ | ||
| ;VI_COMP_MODE_DOUBLE = 1, /*double component mode */ | ||
| Clock_edge =1 ;Clock edge mode (sampling on the rising or falling edge) | ||
| ;VI_CLK_EDGE_SINGLE_UP=0, /*rising edge */ | ||
| ;VI_CLK_EDGE_SINGLE_DOWN, /*falling edge */ | ||
| Mask_num =2 ;Component mask | ||
| Mask_0 =0xFFC00000 | ||
| Mask_1 =0x0 | ||
| Scan_mode = 1;VI_SCAN_INTERLACED = 0 | ||
| ;VI_SCAN_PROGRESSIVE, | ||
| Data_seq =2 ;data sequence (ONLY for YUV format) | ||
| ;----2th component U/V sequence in bt1120 | ||
| ; VI_INPUT_DATA_VUVU = 0, | ||
| ; VI_INPUT_DATA_UVUV, | ||
| ;----input sequence for yuv | ||
| ; VI_INPUT_DATA_UYVY = 0, | ||
| ; VI_INPUT_DATA_VYUY, | ||
| ; VI_INPUT_DATA_YUYV, | ||
| ; VI_INPUT_DATA_YVYU | ||
|
|
||
| Vsync =0 ; vertical synchronization signal | ||
| ;VI_VSYNC_FIELD = 0, | ||
| ;VI_VSYNC_PULSE, | ||
| VsyncNeg=0 ;Polarity of the vertical synchronization signal | ||
| ;VI_VSYNC_NEG_HIGH = 0, | ||
| ;VI_VSYNC_NEG_LOW /*if VIU_VSYNC_E | ||
| Hsync =0 ;Attribute of the horizontal synchronization signal | ||
| ;VI_HSYNC_VALID_SINGNAL = 0, | ||
| ;VI_HSYNC_PULSE, | ||
| HsyncNeg =0 ;Polarity of the horizontal synchronization signal | ||
| ;VI_HSYNC_NEG_HIGH = 0, | ||
| ;VI_HSYNC_NEG_LOW | ||
| VsyncValid =1 ;Attribute of the valid vertical synchronization signal | ||
| ;VI_VSYNC_NORM_PULSE = 0, | ||
| ;VI_VSYNC_VALID_SINGAL, | ||
| VsyncValidNeg =0;Polarity of the valid vertical synchronization signal | ||
| ;VI_VSYNC_VALID_NEG_HIGH = 0, | ||
| ;VI_VSYNC_VALID_NEG_LOW | ||
| Timingblank_HsyncHfb =408 ;Horizontal front blanking width | ||
| Timingblank_HsyncAct =1280 ;Horizontal effetive width | ||
| Timingblank_HsyncHbb =0 ;Horizontal back blanking width | ||
| Timingblank_VsyncVfb =6 ;Vertical front blanking height | ||
| Timingblank_VsyncVact =720 ;Vertical effetive width | ||
| Timingblank_VsyncVbb=6 ;Vertical back blanking height | ||
| Timingblank_VsyncVbfb =0 ;Even-field vertical front blanking height(interlace, invalid progressive) | ||
| Timingblank_VsyncVbact=0 ;Even-field vertical effetive width(interlace, invalid progressive) | ||
| Timingblank_VsyncVbbb =0 ;Even-field vertical back blanking height(interlace, invalid progressive) | ||
|
|
||
| DataPath =1 ;ISP enable or bypass | ||
| ;VI_PATH_BYPASS = 0,/* ISP bypass */ | ||
| ;VI_PATH_ISP = 1,/* ISP enable */ | ||
| ;VI_PATH_RAW = 2,/* Capture raw data, for debug */ | ||
| InputDataType=1 ;VI_DATA_TYPE_YUV = 0,VI_DATA_TYPE_RGB = 1, | ||
| DataRev =FALSE ;Data reverse. FALSE = 0; TRUE = 1 | ||
| DevRect_x=0 | ||
| DevRect_y=0 | ||
| DevRect_w=1280 | ||
| DevRect_h=720 | ||
|
|
||
| [vi_chn] | ||
| CapRect_X =0 | ||
| CapRect_Y =0 | ||
| CapRect_Width=1280 | ||
| CapRect_Height=720 | ||
| DestSize_Width=1280 | ||
| DestSize_Height=720 | ||
| CapSel =2 ;Frame/field select. ONLY used in interlaced mode | ||
| ;VI_CAPSEL_TOP = 0, /* top field */ | ||
| ;VI_CAPSEL_BOTTOM, /* bottom field */ | ||
| ;VI_CAPSEL_BOTH, /* top and bottom field */ | ||
| PixFormat =19;PIXEL_FORMAT_YUV_SEMIPLANAR_422 = 22 | ||
| ;PIXEL_FORMAT_YUV_SEMIPLANAR_420 = 23 ...etc | ||
| CompressMode =0 ;COMPRESS_MODE_NONE = 0 | ||
| ;COMPRESS_MODE_SEG =1 ...etc | ||
|
|
||
| [AWB] | ||
| AdvAWBAttr=1|8|0x30|0xFF9|0 | ||
| ; HI_BOOL bAccuPrior, recommended 0 for outdoor, 1 for indoor | ||
| ; HI_U8 u8Tolerance, Range:[0x0, 0xFF], AWB adjust tolerance,for outdoor, this value should be small, recommended 4 | ||
| ; HI_U16 u16CurveLLimit, Range:[0x0, 0x100], Left limit of AWB Curve, recommended for indoor 0xE0, outdoor 0xE0 | ||
| ; HI_U16 u16CurveRLimit, Range:[0x100, 0xFFF], Right Limit of AWB Curve,recommended for indoor 0x130, outdoor 0x120 | ||
| ; HI_BOOL bGainNormEn |
9 changes: 9 additions & 0 deletions
9
devices/hi3518cv100_lite_dlink-dcs-2330l/general/overlay/etc/wireless/usb
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,9 @@ | ||
| #!/bin/sh | ||
|
|
||
| if [ "$1" = "rtl8188eu-dlink-dcs-2330l" ]; then | ||
| # The status matters: S40network gives the cable DHCP when WiFi fails | ||
| modprobe 8188eu rtw_power_mgnt=0 rtw_ips_mode=0 rtw_enusbss=0 | ||
| exit $? | ||
| fi | ||
|
|
||
| exit 1 |
28 changes: 28 additions & 0 deletions
28
devices/hi3518cv100_lite_dlink-dcs-2330l/general/overlay/usr/share/openipc/customizer.sh
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,28 @@ | ||
| #!/bin/sh | ||
| # | ||
| # Perform basic settings on a known IP camera | ||
| # | ||
| # | ||
| # Set custom upgrade url | ||
| # | ||
| fw_setenv upgrade 'https://github.com/OpenIPC/builder/releases/download/latest/hi3518cv100_lite_dlink-dcs-2330l-nor.tgz' | ||
| # | ||
| # | ||
| # Set custom majestic settings | ||
| # | ||
| # This board wires the OV9712 to VI bits 22-31, not the 20-29 of the stock ini | ||
| cli -s .isp.sensorConfig /etc/sensors/ov9712_i2c_dc_720p_dcs2330l.ini | ||
| cli -s .nightMode.irCutPin1 0 | ||
| cli -s .nightMode.lightMonitor true | ||
| cli -s .video0.codec h264 | ||
| cli -s .video0.fps 20 | ||
| # | ||
| # | ||
| # Set wlan device and credentials if need | ||
| # | ||
| fw_setenv wlandev rtl8188eu-dlink-dcs-2330l | ||
| #fw_setenv wlanssid Router | ||
| #fw_setenv wlanpass 12345678 | ||
| # | ||
|
|
||
| exit 0 |
49 changes: 49 additions & 0 deletions
49
devices/hi3518cv100_lite_dlink-dcs-2330l/general/scripts/excludes/hi3518cv100_lite.list
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,49 @@ | ||
| /etc/sensors/ar0130_i2c_960p.ini | ||
| /etc/sensors/gc1004_i2c_dc_720p.ini | ||
| /etc/sensors/imx122_spi_dc_1080p.ini | ||
| /etc/sensors/imx138_i2c_dc_720p.ini | ||
| /etc/sensors/imx138_spi_dc_720p.ini | ||
| /etc/sensors/imx222_spi_dc_1080p.ini | ||
| /etc/sensors/imx225_i2c_720p.ini | ||
| /etc/sensors/imx225_i2c_960p.ini | ||
| /etc/sensors/imx322_spi_dc_1080p.ini | ||
| /etc/sensors/imx323_spi_dc_1080p.ini | ||
| /etc/sensors/jxh22_i2c_dc_720p.ini | ||
| /etc/sensors/jxh42_i2c_dc_720p.ini | ||
| /etc/sensors/mt9p006_i2c_dc_720p.ini | ||
| /etc/sensors/ov2710_i2c_dc_1080p.ini | ||
| /etc/sensors/sc1035_960p.ini | ||
| /etc/sensors/sc1135_720p.ini | ||
| /etc/sensors/sc2135_i2c_dc_1080p.ini | ||
| # | ||
| /usr/lib/sensors/libsns_9m034.so | ||
| /usr/lib/sensors/libsns_ar0130.so | ||
| /usr/lib/sensors/libsns_ar0130_720p.so | ||
| /usr/lib/sensors/libsns_ar0130_960p.so | ||
| /usr/lib/sensors/libsns_ar0140.so | ||
| /usr/lib/sensors/libsns_ar0330.so | ||
| /usr/lib/sensors/libsns_ar0330_1080p.so | ||
| /usr/lib/sensors/libsns_gc1004ok.so | ||
| /usr/lib/sensors/libsns_h22.so | ||
| /usr/lib/sensors/libsns_hm1375.so | ||
| /usr/lib/sensors/libsns_icx692.so | ||
| /usr/lib/sensors/libsns_imx104.so | ||
| /usr/lib/sensors/libsns_imx122.so | ||
| /usr/lib/sensors/libsns_imx138.so | ||
| /usr/lib/sensors/libsns_imx138_i2c_dc.so | ||
| /usr/lib/sensors/libsns_imx222_spi_dc.so | ||
| /usr/lib/sensors/libsns_imx225_i2c_720p.so | ||
| /usr/lib/sensors/libsns_imx225_i2c_960p.so | ||
| /usr/lib/sensors/libsns_imx225_spi_720p.so | ||
| /usr/lib/sensors/libsns_imx236.so | ||
| /usr/lib/sensors/libsns_jxh42.so | ||
| /usr/lib/sensors/libsns_jxh42_i2c.so | ||
| /usr/lib/sensors/libsns_mn34031.so | ||
| /usr/lib/sensors/libsns_mn34031_720p.so | ||
| /usr/lib/sensors/libsns_mn34041.so | ||
| /usr/lib/sensors/libsns_mt9p006.so | ||
| /usr/lib/sensors/libsns_ov2710.so | ||
| /usr/lib/sensors/libsns_ov9732.so | ||
| /usr/lib/sensors/libsns_po3100k.so | ||
| /usr/lib/sensors/libsns_sc1035_720p.so | ||
| /usr/lib/sensors/libsns_sc1035_960p.so |
Oops, something went wrong.
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Uh oh!
There was an error while loading. Please reload this page.