Link support articles directly instead of through legacy redirects

src/content/docs/archive.md

@@ -82,7 +82,7 @@ The source can be viewed [on GitHub](https://github.com/system76/tech-docs).
 
 ## Previous Models Not in Tech Docs
 
-Some older models that aren't listed on the Tech Docs website have quickstart guides or service manuals available on the [System76 Support website](https://support.system76.com/articles/guides).
+Some older models that aren't listed on the Tech Docs website have quickstart guides or service manuals available on the [System76 Support website](https://system76.com/support/guides/).
 
 ## Current Models
 

src/content/docs/models/nebula19-1/assembly.mdx

@@ -389,4 +389,4 @@ Both daughterboards can be removed and replaced if necessary. The external power
 ### Steps to replace the power button:
 
 1. [Remove the top case](#removing-the-top-case).
-2. Follow the instructions in the [Replace the Thelio Power Button](https://support.system76.com/articles/thelio-power-button/) support article.
+2. Follow the instructions in the [Replace the Thelio Power Button](https://system76.com/support/thelio-power-button/) support article.

src/content/docs/models/nebula36-1/assembly.md

@@ -386,4 +386,4 @@ Both daughterboards can be removed and replaced if necessary. The external power
 ### Steps to replace the power button:
 
 1. [Remove the top case](#removing-the-top-case).
-2. Follow the instructions in the [Replace the Thelio Power Button](https://support.system76.com/articles/thelio-power-button/) support article.
+2. Follow the instructions in the [Replace the Thelio Power Button](https://system76.com/support/thelio-power-button/) support article.

src/content/docs/models/nebula40-3/assembly.md

@@ -400,4 +400,4 @@ Both daughterboards can be removed and replaced if necessary. The external power
 ### Steps to replace the power button:
 
 1. [Remove the top case](#removing-the-top-case).
-2. Follow the instructions in the [Replace the Thelio Power Button](https://support.system76.com/articles/thelio-power-button/) support article.
+2. Follow the instructions in the [Replace the Thelio Power Button](https://system76.com/support/thelio-power-button/) support article.

src/content/docs/models/nebula49-1/assembly.md

@@ -384,4 +384,4 @@ Both daughterboards can be removed and replaced if necessary. The external power
 ### Steps to replace the power button:
 
 1. [Remove the top case](#removing-the-top-case).
-2. Follow the instructions in the [Replace the Thelio Power Button](https://support.system76.com/articles/thelio-power-button/) support article.
+2. Follow the instructions in the [Replace the Thelio Power Button](https://system76.com/support/thelio-power-button/) support article.

src/content/docs/models/thelio-astra-a1-n1/repairs.mdx

@@ -512,4 +512,4 @@ If the front power button doesn't power the machine on or doesn't light up when
 ### Steps to replace the power button:
 
 1. Follow the steps above to [remove the top case](#removing-the-top-case).
-2. Follow the instructions in the [Replace the Thelio Power Button](https://support.system76.com/articles/thelio-power-button/) support article.
+2. Follow the instructions in the [Replace the Thelio Power Button](https://system76.com/support/thelio-power-button/) support article.

src/content/docs/models/thelio-b4/repairs.mdx

@@ -443,4 +443,4 @@ If the front power button doesn't power the machine on or doesn't light up when
 ### Steps to replace the power button:
 
 1. Follow the steps above to [remove the top case](#removing-the-top-case).
-2. Follow the instructions in the [Replace the Thelio Power Button](https://support.system76.com/articles/thelio-power-button/) support article.
+2. Follow the instructions in the [Replace the Thelio Power Button](https://system76.com/support/thelio-power-button/) support article.

src/content/docs/models/thelio-major-b1-b2-r1-r2/repairs.mdx

@@ -808,9 +808,9 @@ Replacing an M.2 drive may require removal of the GPU or CPU Cooler Duct for eas
 
 **NOTE:** By default, the first of the two M.2 drives (NVMe or not) stores your operating system, so you will need to reinstall the OS after replacing it. This can be done by restoring from a backup, or from a fresh install.
 
-Pop!\_OS users, instructions to reinstall the OS can be found here: https://support.system76.com/articles/install-pop/
+Pop!\_OS users, instructions to reinstall the OS can be found here: https://system76.com/support/install-pop/
 
-Ubuntu users, instructions to reinstall the OS can be found here: https://support.system76.com/articles/install-ubuntu/.
+Ubuntu users, instructions to reinstall the OS can be found here: https://system76.com/support/install-ubuntu/.
 
 [Return to Contents](#table-of-contents)
 

src/content/docs/models/thelio-major-r3/repairs.mdx

@@ -470,4 +470,4 @@ If the front power button doesn't power the machine on or doesn't light up when
 ### Steps to replace the power button:
 
 1. Follow the steps above to [remove the top case](#removing-the-top-case).
-2. Follow the instructions in the [Replace the Thelio Power Button](https://support.system76.com/articles/thelio-power-button/) support article.
+2. Follow the instructions in the [Replace the Thelio Power Button](https://system76.com/support/thelio-power-button/) support article.

src/content/docs/models/thelio-major-r5-n3/repairs.mdx

@@ -387,7 +387,7 @@ The CPU cooler dissipates heat from the CPU to the heatsink, where the CPU fans
 9. Screw the three Torx screws back into place in order of the printed numbers (starting with #1).
     - The AMD Threadripper-branded tool applies 1.5 Nm of torque. When the screw is tight enough, it will give way.
     - If you're using a different screwdriver, use a torque tool to apply approximately the same amount of torque (1.5 Nm, or ~13.275 in-lb).
-    - If you're using a screwdriver without a torque tool, try to tighten all three screws evenly. After re-assembling the computer, [run a RAM test](https://support.system76.com/articles/hardware-failure#memory) to ensure the CPU is secured with the correct amount of force.
+    - If you're using a screwdriver without a torque tool, try to tighten all three screws evenly. After re-assembling the computer, [run a RAM test](https://system76.com/support/hardware-failure/#memory) to ensure the CPU is secured with the correct amount of force.
 
 ### Steps to install the thermal paste/CPU cooler:
 
@@ -628,4 +628,4 @@ If the front power button doesn't power the machine on or doesn't light up when
 ### Steps to replace the power button:
 
 1. Follow the steps above to [remove the top case](#removing-the-top-case).
-2. Follow the instructions in the [Replace the Thelio Power Button](https://support.system76.com/articles/thelio-power-button/) support article.
+2. Follow the instructions in the [Replace the Thelio Power Button](https://system76.com/support/thelio-power-button/) support article.

src/content/docs/models/thelio-major-r5-n4/repairs.mdx

@@ -606,7 +606,7 @@ Thelio Major R5-N4 includes a self-contained liquid cooler to dissipate heat fro
 8. Screw the three Torx screws back into place in order of the printed numbers (starting with #1).
     - The AMD Threadripper-branded tool applies 1.5 Nm of torque. When the screw is tight enough, it will give way.
     - If you're using a different screwdriver, use a torque tool to apply approximately the same amount of torque (1.5 Nm, or ~13.275 in-lb).
-    - If you're using a screwdriver without a torque tool, try to tighten all three screws evenly. After re-assembling the computer, [run a RAM test](https://support.system76.com/articles/hardware-failure#memory) to ensure the CPU is secured with the correct amount of force.
+    - If you're using a screwdriver without a torque tool, try to tighten all three screws evenly. After re-assembling the computer, [run a RAM test](https://system76.com/support/hardware-failure/#memory) to ensure the CPU is secured with the correct amount of force.
 
 ### Steps to replace the CPU cooler's fans:
 

src/content/docs/models/thelio-massive-b1.2/repairs.md

@@ -356,7 +356,7 @@ If the front power button doesn't power the machine on or doesn't light up when
 ### Steps to replace the power button:
 
 1. Follow the steps above to [remove the top case](#removing-the-top-case).
-2. Follow the instructions in the [Replace the Thelio Power Button](https://support.system76.com/articles/thelio-power-button/) support article.
+2. Follow the instructions in the [Replace the Thelio Power Button](https://system76.com/support/thelio-power-button/) support article.
 
 ## Troubleshooting the Thelio-IO USB connection:
 

src/content/docs/models/thelio-mega-r1.0/repairs.mdx

@@ -520,7 +520,7 @@ If the front power button doesn't power the machine on or doesn't light up when
 ### Steps to replace the power button:
 
 1. Follow the steps above to [remove the top case](#removing-the-top-case).
-2. Follow the instructions in the [Replace the Thelio Power Button](https://support.system76.com/articles/thelio-power-button/) support article.
+2. Follow the instructions in the [Replace the Thelio Power Button](https://system76.com/support/thelio-power-button/) support article.
 
 ## Troubleshooting the Thelio-IO USB connection:
 

src/content/docs/models/thelio-mega-r4-n3/repairs.mdx

@@ -681,5 +681,5 @@ If the front power button doesn't power the machine on or doesn't light up when
 ### Steps to replace the power button:
 
 1. Follow the steps above to [remove the top case](#removing-the-top-case).
-2. Follow the instructions in the [Replace the Thelio Power Button](https://support.system76.com/articles/thelio-power-button/) support article.
+2. Follow the instructions in the [Replace the Thelio Power Button](https://system76.com/support/thelio-power-button/) support article.
 

src/content/docs/models/thelio-mira-b1.0/repairs.mdx

@@ -414,4 +414,4 @@ If the front power button doesn't power the machine on or doesn't light up when
 ### Steps to replace the power button:
 
 1. Follow the steps above to [remove the top case](#removing-the-top-case).
-2. Follow the instructions in the [Replace the Thelio Power Button](https://support.system76.com/articles/thelio-power-button/) support article.
+2. Follow the instructions in the [Replace the Thelio Power Button](https://system76.com/support/thelio-power-button/) support article.

src/content/docs/models/thelio-mira-b4-n3/repairs.mdx

@@ -599,4 +599,4 @@ If the front power button doesn't power the machine on or doesn't light up when
 ### Steps to replace the power button:
 
 1. Follow the steps above to [remove the top case](#removing-the-top-case).
-2. Follow the instructions in the [Replace the Thelio Power Button](https://support.system76.com/articles/thelio-power-button/) support article.
+2. Follow the instructions in the [Replace the Thelio Power Button](https://system76.com/support/thelio-power-button/) support article.

src/content/docs/models/thelio-mira-r1.0/repairs.md

@@ -394,7 +394,7 @@ If the front power button doesn't power the machine on or doesn't light up when
 ### Steps to replace the power button:
 
 1. Follow the steps above to [remove the top case](#removing-the-top-case).
-2. Follow the instructions in the [Replace the Thelio Power Button](https://support.system76.com/articles/thelio-power-button/) support article.
+2. Follow the instructions in the [Replace the Thelio Power Button](https://system76.com/support/thelio-power-button/) support article.
 
 ## Troubleshooting the Thelio-IO USB connection:
 

src/content/docs/models/thelio-mira-r3/repairs.mdx

@@ -448,4 +448,4 @@ If the front power button doesn't power the machine on or doesn't light up when
 ### Steps to replace the power button:
 
 1. Follow the steps above to [remove the top case](#removing-the-top-case).
-2. Follow the instructions in the [Replace the Thelio Power Button](https://support.system76.com/articles/thelio-power-button/) support article.
+2. Follow the instructions in the [Replace the Thelio Power Button](https://system76.com/support/thelio-power-button/) support article.

src/content/docs/models/thelio-r3-n1/repairs.mdx

@@ -559,4 +559,4 @@ If the front power button doesn't power the machine on or doesn't light up when
 ### Steps to replace the power button:
 
 1. Follow the steps above to [remove the top case](#removing-the-top-case).
-2. Follow the instructions in the [Replace the Thelio Power Button](https://support.system76.com/articles/thelio-power-button/) support article.
+2. Follow the instructions in the [Replace the Thelio Power Button](https://system76.com/support/thelio-power-button/) support article.

src/content/docs/models/thelio-spark-b1-n2/repairs.mdx

@@ -616,4 +616,4 @@ If the front power button doesn't power the machine on or doesn't light up when
 ### Steps to replace the power button:
 
 1. Follow the steps above to [remove the top case](#removing-the-top-case).
-2. Follow the instructions in the [Replace the Thelio Power Button](https://support.system76.com/articles/thelio-power-button/) support article.
+2. Follow the instructions in the [Replace the Thelio Power Button](https://system76.com/support/thelio-power-button/) support article.